ASHLAR PATTERN -
A dramatic design incorporating 6 sizes of pavers. Pattern repeats itself.
BORDERSTONE - precast concrete unit used as landscape edging, or
planter box up to 5 courses tall.
BROOM FINISH - when wet concrete is brushed lightly to provide
striations creating a slip resistant finish.
CALIFORNIA ARCHITECTURAL PAVERS - pavers with sandblast finish.
CALIFORNIA ARCHITECTURAL PEDESTAL PAVERS - roofing paver supported
by an independent adjustable pedestal system. Generally with sandblast
finish. Reinforced with zinc plated wire mesh. ("5000 psi")
CLASSIC ROOF PAVERS - roofing pavers set on a waterproofed roof
surface for protection and decoration. ("4000psi")
CLASSIC GARDEN STEPS - A bullnose step paver used at elevation
changes and may be earth or mortar set.
CLASSIC GROOVED STEPS - Step paver ADA complient with 4 grooves
cast directly into steps that is 2" wide and 1" from nosing and may be
earth or mortar set.
CLASSIC LIGHTWEIGHT ROOF PAVERS - roofing paver with expanded polystyrene
core and 1" of concrete covering. 12 pounds per square foot (half of normal
CLASSIC POOL COPING - precast unit with 1 side bullnosed to be
used at the pools edge as coping.
CLASSIC TREAD STEPS - precast unit with 1 side bullnosed to be
used at the steps edges.
CLASSIC WALKS - pavers designed to be sand set, earth set or mortar
set. Paver has non-slip stipple finish.
CLASSIC WALL CAP - wall cap with bullnose edge detail designed
to overhang 1" each side. Includes straights, ends and corners. Rests
on masonry walls, wood frame with stucco, block or poured in place walls.
4000 psi. 5 standard sizes. 9 standard colors. RADIUS WALL CAP available
in some standard radii.
CONTRASTING STRIPE - contrasting stripes cast into Steptreads where
required by ADA compliance, 2" wide and 1" from nosing.
DEKSTONE - a paver that replaces wood decking material. 24" x 24",
reinforced with zinc plated wire mesh. Paver spans from joist to joist.
Available in a variety of finishes.
DIAGONAL SANDBLAST - creating a pattern where half the paver is
sandblasted diagonally (from corner to corner) and the other half is stipple
DRYDECK INTEGRAL PEDESTAL PAVER - a roofing paver where, 60-Pound
High Density Dow Styrofoam feet are cast into the four corners providing
integral pedestal support. Design follows grade. Total of 2 1/2"
EXPOSED AGGREGATE FINISH - a surface treatment that exposes decorative
aggregates of different colors and sizes.
FINE GRAIN STIPPLE FINISH - a surface finish with small grain size
projections, barely discernable to the eye, but provides a slip resistant
finish. It is the standard finish for the Classic product line pavers
and Classic Tread Steps.
FORM FINISH - smooth to the touch and eye. Created by casting into
a smooth form.
NINE-PIECE COLOR SAMPLE BOX - box of 9 3" x 3" x 1" color samples
available in Classic Walks with the Fine Grain Stipple Finish or in California
Architectural with a sandblast finish. Colors include Iceberg Green, French
Gray, Malibu, Sante Fe Buff, Granada White, Sunset Rose, Cafe Brown, Almond
and Expresso Brown.
PEDESTAL PAVERS - reinforced roof pavers used with independent
adjustable pedestal support. Typically 24" x 24" x 2". Variety of finishes
and colors available.
PILASTER CAPS - available in peaked or flat. 4 standard peaked
sizes and 6 standard flat sizes. Optional 2 1/2" square hole in center
for electrical on both peaked or flat.
ROOFTRAC HEAVY DUTY ROOF PAVER - a high strength durable reinforced
plank design for the staging of window washing equipment, typically in
high rise buildings.
SANDBLASTING - Stone like texture created by sandblasting away
the smooth surface of the precast concrete units to expose the aggregates
inside. Available in 4 depths of blasting: light, medium
SONORASTONE® FINISH - natural stone look (similar to slate). Available
in standard variegated colors - wheat, desert, terra and flint.
STAIR TREAD: The horizontal portion of a step. The tread is the portion of the step on which you place your feet.
STEPTREADS - structural steps with Open riser or Closed riser,
for wood or steel stringers, in bolt-on or weld-on attachments. Available
with or without the 2" warning stripe. Many Sizes available - standard
is 36" to 48". Various finishes available such as broom finish, exposed
aggregate or sandblasted.
STRINGER: A Stringer is the long piece that the stair treads attach to on either side, and which goes diagonally up the wall. The handrails sit atop vertical supports which are secured into the stringer as well.
MODERN PROFILE - closed riser tread where the face of the riser
(the profile) is sloped in a diagonal line 1".
CLASSIC PROFILE - Closed riser tread where the face of the riser
(the profile) starts vertical at the nose for approximately 2" and then
slopes in a diagonal line 1" - ADA compliant.
WEDGE PROFILE - A flat tread 2 1/2" thick with a diagonally
sloped nose and steel embeds for attaching a steel riser.